1
In How to useby

How to set up Vector Forex system

How to set up and use Vector Forex system

So, after purchasing the system, we send the buyer a ZIP archive. Unpack this archive and copy it to the root directory of your MetaTrader 4 platform.

To do this, open the MT4 root directory:

Copy the archive contents to the root directory of the Metatrader platform:

Have you already
subscribed?

Restart your platform so that the indicators appear in the internal menu of MetaTrader.

Open the window of any currency pair and set the timeframe H1:

Apply the Vector system template to the open window of the quote chart:

You should get something like this quote chart. It is ready to trade. It remains to wait for the trading signal and make a deal:

How to trade and make a profit using the Vector Forex system

So, above we showed how to set up the Forex system Vector on 1 window. As a rule, this system gives 1-2 trading signals on one window of the quotation chart within 1 day.
Therefore, in order to get more trading signals within 1 day, we recommend installing the Vector system on 7-10 quote charts. This means that you can receive about 10 trading signals within 1 day. In addition to increasing the number of transactions, this way you get another additional positive effect – you get a diversification of trading results. Because you trade simultaneously on a large number of currency pairs that have different movement dynamics and different profitability statistics.

When a condition for trading appears, the Vector Signal indicator Generator displays a pop-up window and a sound alert about the occurrence of a new signal for trading.
In the pop-up window, you will see a message indicating the name of the currency pair and the direction of trading:

Open the quote chart where the trading signal appeared and make a quick analysis. All of the following conditions must be present on the price chart:

For Sell deals:

  • The vector Signal Generator Arrow should be pointing down.
  • Alligator indicator lines should show the price drop (purple line at the top, red line in the middle, blue line at the bottom)
  • The Histogram of the Vector CCI Filter indicator should be below 0, the signal line should be below 0
  • Vector Main Trend should be completely blue, meaning it should show a falling trend on all timeframes.

If one of these conditions is not met, the deal cannot be concluded. If all these conditions are met, make a deal on Sell.

Take profit is set at the bottom at the nearest support level of Vector Pivot Points. If the level is closer than 10 points, then the take Take Profit order should be placed at the next support level.

The stop loss is set at the nearest resistance level at the top. If this level is closer than 10 points, then the stop loss should be placed at the next resistance level Vector Pivot Points.

For Buy deals:

  • The vector Signal Generator arrow should point up.
  • Alligator indicator lines should show growth (purple line at the bottom, red line in the middle, blue line at the top)
  • The Histogram of the Vector CCI Filter indicator should be above the 0 level, the signal line should be above the 0 level
  • The Vector Main Trend should be colored purple, i.e. it should show a growing trend on the higher timeframe.

If one of these conditions is not met, then the deal cannot be concluded. If all of these conditions are met, enter into a BUY deals.

  • Take Profit set at the nearest resistance Vector Pivots level at the top. If the level is closer than 10 points, then the take Take Profit order should be placed at the next resistance level Vector Pivots at the top.
  • Stop Loss set Vector Pivots at the nearest support level from below. If this level is located closer than 10 points, then Stop Loss should be placed at the next level of Vector Pivots at the bottom.

If you haven’t bought the Vector system yet, it’s time to do it. After all, quotes move and each new wave could bring you profit!

In How to useby

GRAVITY SYSTEM

Manual for INDEX GRAVITY SYSTEM metatrader indicator

The INDEX GRAVITY SYSTEM is an «all-inclusive» metatrader indicator. During its creation I tried to solve several important subjects:

  1. to make the forex signal indicator which work in any market – for this We have integrated into the indicator an algorithm of self-optimization, which automatically adjusts the parameters of the indicator to obtain the maximum trading result, and in the case of transition of the market to another state, the profitable forex indicator was able to quickly adjust to market changes;
  2. to make the forex signal indicator easy to trade – for this We equipped the indicator with a system of pop-up alerts, visual forex arrows that show when to open trades and when to close trades;
  3. so that the trader could see the profitability of the system before using the metatrader indicator – for this We have integrated into the forex signal indicator a system of counting statistics, which shows the profitability of the system in the history of the last 5000 bars;
  4. to forex trading indicators brought a good amount of profit-about 10-30% per month
  5. to the forex arrows brought minimal losses.
So, first of all, we will describe in detail how this indicator works and what signals it gives.

Note. Each buyer of this metatrader indicator receives an additional professional Gravity Keltner indicator as a gift, which will help you correctly determine the boundaries of the price channel.

Have you already
subscribed?

How does GRAVITY INDEX SYSTEM works

STRATEGY 1 – GRAVITY in a KELTNER CHANNEL

The main forex trading indicators of this system is the INDEX GRAVITY HISTOGRAM, which analyzes the entire basket of the market at once and reveals the moments when one particular currency begins to rise in price or become cheaper against other currencies.

When you put the metatrader indicator on a specific currency pair (for example – on AUDCAD), INDEX GRAVITY HISTOGRAM analyzes all currency pairs on your platform, where there is a currency AUD (AUDUSD, EURAUD, AUDCHF, AUDJPY, AUDNZD, etc.) and calculates an index for it. In parallel, the profitable forex indicator analyzes all currency pairs where there is CAD (CADCHF, EURCAD, GBPCAD, CADJPY, etc.) and calculates the index of this pair. After that, the indicator shows the ratio of the indices of the two currencies (AUD index and CAD index) in the form of a histogram:

This histogram shows the moments when currency indices go from overbought to oversold and back. That is, the reversal moments of the quotes chart:

As you can see, the index histogram accurately identified the moments of the quotes reversal and showed the arrows where it is necessary to make deals

For convenience, the histogram is divided by special levels, which are the average levels of index reversal. These levels are determined for each currency pair automatically using self-optimization (how the self-optimization algorithm works, I will write below).

So, after the INDEX GRAVITY HISTOGRAM has detected a reversal of the index, the forex arrows  indicator gives a signal for trading.

However, if this signal meets one important condition:

  • For sell trades – if the quotes are above the boundary of the GRAVITY KELTNER channel (or the signal candle touches the border of the GRAVITY channel),
  • For buy trades – if the quotes are below the boundary of the GRAVITY KELTNER channel (or the signal candle touches the border of the GRAVITY channel):

The GRAVITY KELTNER indicator is embedded inside the INDEX GRAVITY SYSTEM and displays the channel boundaries and the center line of the channel in this way):

OK, so that you can understand how this profitable Forex indicator works in reality, we made a video for you:

As we wrote above, each buyer of this forex signal indicator receives another gift – a professional Gravity Keltner indicator that will help visually track the boundaries of the price channel.

Thus, we use only those signals INDEX GRAVITY HISTOGRAM, which have a great potential reversal. As you know, quotes tend to periodically return to their average value. In simple words, the meaning of this system is to wait for the quotes to deviate from their average value by the maximum distance and make a deal that will be profitable because the quotes constantly return to their average value under the pressure of the “gravity” of the currency market.

Gravity Keltner filter allows us to use only those forex arrows signals that have a deal level at a sufficient distance from the average value of the asset price.

INDEX GRAVITY SYSTEM displays all signals for trading in the form of forex arrows of the corresponding direction on the quotes chart. Also, the indicator gives PUSH and email signals. Thus, you can receive signals on your smartphone and make deals using the mobile platform.

When to close deals?

The moment for closing your trades is the moment the price touches the center line of the GRAVITY KELTNER channel. In simple words – the moment when the force of gravity will return the price from the stage of maximum local deviation to its average value.

You can put TP on the level of the Central line of the channel manually.

OK, now that you understand how this metatrader indicator works, we will teach You how to set the forex trading indicators on a quote chart and run a self-optimization algorithm.

How to set up the INDEX GRAVITY SYSTEM indicator

NDEX GRAVITY SYSTEM is a multi-currency forex signal indicator which simultaneously assesses the entire market basket (all available currency pairs). Therefore, to start the profitable forex indicator operation, it is necessary:

Add all available currency pairs in the «Market Watch» tab:

Before the first installation of the indicator, it is necessary to open all charts of quotes from the “Market Watch” tab so that your trading platform automatically downloads all the quotes history necessary for the indicator to work.

Pay attention to the name of the currency pairs in your terminal. Often brokerage companies add a special symbol – suffix to the name of currency pairs. For Example – EURUSDf, EURUSD_с, EURUSDm. Respectively – «_с», «m» – it’s a suffix.

If the name of the currency pairs on your platform differs from the traditional name, specify this suffix in the manual settings of the indicator:

write in the manual settings of the indicator suffix «m» if the name – EURUSDm

write in the manual settings of the indicator suffix «_c» if the name – EURUSD_c

Once you have downloaded all the necessary history of quotations, you can self-optimize. For self-optimization it is necessary:

  1. Put the forex signal indicator on the quotes chart.
  2. For the “Self-optimization algorithm” variable, select “True” and click “OK” to apply the metatrader indicator:

After applying the forex arrows indicator with the self-optimization parameter enabled, optimization will start. Visually it will look like your platform is frozen. Do not worry, it is optimized. The average optimization time takes about 10-30 seconds. About 10-30 seconds after the indicator is applied, a message will appear stating that the self-optimization has been performed and the statistics of the optimized parameters will appear in the indicator statistics window:

The indicator writes all the optimization results to a special file and stores them in the “Files” folder in the root directory of your platform. This is done in order not to carry out self-optimization constantly, but to use the parameters that were optimized earlier (In the future this file will be constantly updated (every time a planned self-optimization takes place at a time of your choice).

If you have already optimized for the H1 timeframe (or another timeframe) of a particular currency pair and now want to optimize for the H4 timeframe (or another timeframe), change the number for the «Optimization ID». This unique number helps the forex signal indicator to filter previously obtained results and does not allow to use the same optimization results on different timeframes.

It should be understood that the dynamics of the histogram movement differs significantly on different timeframes. By default, the indicator has settings for self-optimization on the H1 timeframe. If you want to optimize the forex trading indicators for other timeframes, it is best to use my set files to optimize different timeframes (these are 4 set-files for: M15, M30, H1 and H4).

Download the set files to automatically set the initial settings for self-optimization of the indicator.

GRAVITY SET-FILES for start optimization

The time of the planned optimization, you can any that you like. The default is Sunday 11:30 (platform time). At this time, the market is closed and self-optimization will not prevent your trading. Planned optimization will be performed every week at the time you specify. The main thing that at this moment your platform was functioned.

Please set for each price chart different time for planned self-optimization (the difference between the time can be 3-4 minutes) in order to reduce the load on the operating system of your computer. If you simultaneously turn on the optimization of 10-30 charts at once, your operating system may «hang»!

In any case, you can self-optimize the metatrader indicator at any time convenient for you. If you want to optimize the indicator ahead of time, then set the “optimization ID” variable to a new value and apply the indicator to the quote chart again. In this case, the indicator will re-enable the self-optimization algorithm. IMPORTANT! After self-optimization, the profitable forex indicator will stop using the signal levels that were previously set in the default settings. After optimization, the indicator will use new signal levels that are not visible visually on the indicator scale.

Installation of GRAVITY KELTNER indicator

Install the GRAVITY KELTNER metatrader indicator on the quotes chart. At the same time, set the channel width and channel period for it to be the same as the channel width and channel period in the INDEX GRAVITY SYSTEM forex signal indicator!

Thus, GRAVITY KELTNER will be displayed on the quote chart exactly as it works inside the INDEX GRAVITY SYSTEM.

In How to useby

PRICE ACTION DIVER POWER how to use

The FIRST START of price action forex indicator – PRICE ACTION DIVER POWER

  • Copy the PRICE ACTION DIVER POWER indicator divergence mt4 to the “Indicators” folder in the “MQL4” directory of your platform and restart your trading platform MT4.

PRICE ACTION DIVER POWER is a multi-currency price action indicator which simultaneously assesses the entire market basket (all available currency pairs). Therefore, to start the indicator operation, it is necessary:

  • Add all available currency pairs in the «Market Watch» tab:
index
  • Before the first installation of the price action forex indicator, it is necessary to open all charts of quotes from the “Market Watch” tab so that your trading platform automatically downloads all the quotes history necessary for the indicator to work.

How to setup PRICE ACTION DIVER POWER

Once you have downloaded all the necessary history of quotations, you can self-optimize. For self-optimization it is necessary:

  • Apply to quotation schedule the indicator divergence mt4 PRICE ACTION DIVER POWER:

Have you already
subscribed?

  • Pay attention to the name of the currency pairs in your terminal. Often brokerage companies add a special symbol – suffix to the name of currency pairs. For Example – EURUSDf, EURUSD_с, EURUSDm. Respectively – «_с», «m» – it’s a suffix.
    If the name of the currency pairs on your platform differs from the traditional name, specify this suffix in the manual settings of the indicator:

For example, write in the manual settings of the forex trading indicator suffix «m» if the name – EURUSDm:

  • For the “Self-optimization algorithm” variable, select “True” and click “OK” to apply the price action forex indicator:

After applying the indicator with the self-optimization parameter enabled, optimization will start. Visually it will look like your platform is frozen. Do not worry, it is optimized. The average optimization time takes about 10-30 seconds. About 10-30 seconds after the indicator is applied, a message will appear stating that the self-optimization has been performed and the statistics of the optimized parameters will appear in the indicator statistics window:

 

We have tried many options for filtering optimization options. The best algorithm works “Choose the result of the search of the optimizer which has the highest amount of profit and profit factor of at least 2.0”. Thus, the optimizer in the price action forex trading indicator goes through a lot of possible options (about 10 000 options) and chooses the one with the highest amount of profit and profit factor of at least 2.0).

The indicator writes all the optimization results to a special file and stores them in the “Files” folder in the root directory of your platform. This is done in order not to carry out self-optimization constantly, but to use the parameters that were optimized earlier (In the future this file will be constantly updated (every time a planned self-optimization takes place at a time of your choice).

  • If you optimize the indicator on different timeframes

If you have already optimized for the H1 timeframe (or another timeframe) of a particular currency pair and now want to optimize for the H4 timeframe (or another timeframe), change the number for the «Optimization ID». This unique number helps the indicator to filter previously obtained results of price action strategy and does not allow to use the same optimization results on different timeframes:

It should be understood that the dynamics of the oscillator line movement differs significantly on different timeframes. By default, the price action indicator has settings for self-optimization on the H1 timeframe. If you want to optimize the indicator for other timeframes, it is best to use my set files to optimize different timeframes (these are 4 set-files for: M15, M30, H1 and H4).

You can download these set files here – SETS for SELF-OPTIMIZATION

The time of the planned optimization, you can any that you like. The default is Sunday 11:30 (platform time). At this time, the market is closed and self-optimization will not prevent your trading.

Planned optimization will be performed every week at the time you specify. The main thing that at this moment your platform was functioned.

Please set for each price chart different time for planned self-optimization price action forex indicator (the difference between the time can be 3-4 minutes) in order to reduce the load on the operating system of your computer. If you simultaneously turn on the optimization of 10-30 charts at once, your operating system may «hang»!

In any case, you can self-optimize the price action indicator at any time convenient for you. If you want to optimize the indicator ahead of time, then set the “optimization ID” variable to a new value and apply the indicator to the quote chart again. In this case, the indicator will re-enable the self-optimization algorithm.

How to trade with DIVER POWER indicator divergence mt4

The price action indicator gives clear signals about opening and closing trades, as well as shows the levels for placing Take Profit.

The function of visualization of signals and calculation of statistics shows trading history WITHOUT REDRAWING, and also allows the user to adjust the parameters of the indicator for each specific currency pair or timeframe:

Notice – above you can see a screenshot of the quotes chart, which has the signals of the PRICE ACTION DIVER POWER indicator. In the upper left corner – the indicator shows the statistics of its work for the last 5000 bars (for a chart with H1 timeframe it is 5000 hours). That is, how much could a trader earn in the last 5000 hours if he used the PRICE ACTION DIVER POWER indicator.

In order to learn more about the potential of the PRICE ACTION DIVER POWER indicator divergence mt4, you can view in our video:

Starting from the moment you set the indicator on the quote chart, DIVER POWER price action forex indicator will constantly scan the chart of the currency pair and detect divergences and convergences.

Once the indicator detects a divergence or convergence, it will generate a signal indicating – which currency pair you need to open a trade in which direction. Also, DIVER POWER gives a signal about the need to close trades:

Thus, in order to get the results that the indicator shows in the statistics window, you just need to open and close deals using the indicator signals!
Good news for those who do not have time to constantly be near the computer!! The POWER indicator, the DIVER can send PUSH notifications to your smartphone (how to configure PUSH-notification read here).

That is, the indicator can be installed on your home computer or VPS, scan the market and send you signals, and you can trade using the mobile platform MetaTrade4/5 installed on your smartphone!!

Immediately after generated the signal of divergence or convergence, price action forex indicator will place a special line on the quotes chart and place a similar line on the DIVER POWER indicator scale.

• If the line connects the two lows on the quotes chart – is a signal for a BUY trade:

• If the line connects two peaks on the quote chart is a signal for a SELL trade:

When such signals occur, the indicator displays an audio-visual alert and sends a PUSH-notification to the user’s smartphone (if you have configured such a service).
Trades are closed after crossing the POWER line on the lower level 0 indicator. Immediately after crossing the indicator shows an audio-visual alert and sends a PUSH notification to the user’s smartphone.

ALTERNATIVE ALGORITHM OF CLOSING DEALS IN PRICE ACTION STRATEGY

Of course it is clear that it is not always possible to close deals in time (for example, you can sleep or do important things at this time, or you will not have an Internet signal). For such cases, we have provided an alternative way to close deals – this is the level of 0% FIBO CHANNEL, the percentage expansion of which the indicator placed directly on the chart:

Thus, at the conclusion of the deal, you can put a fixed level of Take Profit at the level of 0% FIBO CHANNEL. This level will help your trade close automatically if you are unable to reach your trading platform in time!

How to trade with the PRICE ACTION DIVER POWER forex trading indicator on a real account, you can watch in our video:

How to use FIBO CLOSER utility?

Each buyer of indicator PRICE ACTION DIVER POWER gets a free utility FIBO CLOSER to automatically manage trades. This utility will automatically close your trade when the price touches the “0%” level on the FIBO-CHANNEL scale.

Thus, you can open deals and not accompany them manually. The utility will close trades automatically!

To use the FIBO CLOSER utility:

  • Copy its file to the “Experts” folder in the “MQL4” directory of your platform and restart your trading platform.
  • Install the FIBO CLOSER utility on the quote chart on which you installed the DIVER POWER indicator.
  • Make sure that the automatic trading function is activated on your platform.

The utility will then automatically close trades as soon as the price touches the 0% level on the FIBO-CHANNEL scale (which you can see to the right of the quote chart).

Attention! Use the utility only on one timeframe! It is not recommended to use the utility on different timeframes of the same currency pair at the same time. Because the utility will close all trades on the signals of the timeframe on which the closing condition will appear first.

In How to useby

How to use real power indicator

The FIRST START of PRICE ACTION system REAL POWER

Copy the PRICE ACTION REAL POWER indicator  to the “Indicators” folder in the “MQL4” directory of your platform and restart your trading platform.

PRICE ACTION REAL POWER is a best forex indicator which simultaneously assesses the entire market basket (all available currency pairs). Therefore, to start the indicator operation, it is necessary:

Add all available currency pairs in the «Market Watch» tab:

index

Have you already
subscribed?

Before the first installation of this forex trading indicator, it is necessary to open all charts of quotes from the “Market Watch” tab so that your trading platform automatically downloads all the quotes history necessary for the indicator to work.

How to setup price action analysis indicator – REAL POWER

Once you have downloaded all the necessary history of quotations, you can self-optimize. For self-optimization it is necessary:

  • Apply to quotation schedule the indicator PRICE ACTION REAL POWER:
  • Pay attention to the name of the currency pairs in your terminal. Often brokerage companies add a special symbol – suffix to the name of currency pairs. For Example – EURUSDf, EURUSD_с, EURUSDm. Respectively – «_с», «m» – it’s a suffix.
    If the name of the currency pairs on your platform differs from the traditional name, specify this suffix in the manual settings of the indicator:

For example, write in the manual settings of the indicator suffix «m» if the name – EURUSDm:

  • For the “Self-optimization algorithm” variable, select “True” and click “OK” to apply the indicator:

After applying the best forex indicator with the self-optimization parameter enabled, optimization will start. Visually it will look like your platform is frozen. Do not worry, it is optimized. The average optimization time takes about 10-30 seconds. About 10-30 seconds after the indicator is applied, a message will appear stating that the self-optimization has been performed and the statistics of the optimized parameters will appear in the indicator statistics window:

We have tried many options for filtering price action analysis/optimization options. The best algorithm works “Choose the result of the search of the optimizer which has the highest amount of profit and profit factor of at least 2.0”. Thus, the optimizer in the indicator goes through a lot of possible options (about 10 000 options) and chooses the one with the highest amount of profit and profit factor of at least 2.0).

This price action system writes all the optimization results to a special file and stores them in the “Files” folder in the root directory of your platform. This is done in order not to carry out self-optimization constantly, but to use the parameters that were optimized earlier (In the future this file will be constantly updated (every time a planned self-optimization takes place at a time of your choice).

  • If you optimize the indicator on different timeframes

If you have already optimized for the H1 timeframe (or another timeframe) of a particular currency pair and now want to optimize for the H4 timeframe (or another timeframe), change the number for the «Optimization ID». This unique number helps the indicator to filter previously obtained results and does not allow to use the same optimization results on different timeframes:

It should be understood that the dynamics of the oscillator line movement differs significantly on different timeframes. By default, the price action system REAL POWER has settings for self-optimization on the H1 timeframe. If you want to optimize the indicator for other timeframes, it is best to use my set files to optimize different timeframes (these are 4 set-files for: M15, M30, H1 and H4).

You can download these set-files here – SET-FILES OPT REAL POWER

The time of the planned optimization, you can any that you like. The default is Sunday 11:30 (platform time). At this time, the market is closed and self-optimization will not prevent your trading.

Planned optimization will be performed every week at the time you specify. The main thing that at this moment your platform was functioned.

Please set for each price chart different time for planned price action analysis/self-optimization (the difference between the time can be 3-4 minutes) in order to reduce the load on the operating system of your computer. If you simultaneously turn on the optimization of 10-30 charts at once, your operating system may «hang»!

In any case, you can self-optimize the indicator at any time convenient for you. If you want to optimize the indicator ahead of time, then set the “optimization ID” variable to a new value and apply the indicator to the quote chart again. In this case, the indicator will re-enable the self-optimization algorithm.

HOW TO TRADE WITH best forex indicator REAL POWER

  • Wait for the PRICE ACTION system indicator line to reach one of the Alerts levels above or below the “0” level
  • After turning the indicator line and crossing the auxiliary level in the opposite direction – make a deal. The indicator has an alert that will inform you about the reversal of REAL POWER line at the Alerts level.
  • At this time the indicator will set the Take Profit level at the center of the FIBO CHANNEL.
  • As the quotes move, the Take Profit level on FIBO CHANNEL will slightly shift. Thus, you need to move the Take Profit level of your trade behind the target value of the indicator from time to time.

This kind of trailing Take Profit will allow you to flexibly manage open trading positions and follow the market. If the price went against the open position, you will be able to exit the market with minimal losses during rollback. If the price goes in the right direction (which happens in the vast majority of cases), you will get a good profit.

  • Another option of profit taking, which is recommended to use simultaneously with the Take Profit closing algorithm, is profit taking when the PRICE ACTION REAL POWER indicator line reaches the “0” level.

Thus, you use two profit-taking algorithms at the same time:

• Profit-taking on physical TAKE PROFIT order
• Profit taking when the price reaches the “0” level on the PRICE ACTION REAL POWER indicator scale.

If you make a deal and the price action system line is back above the signal level (and the quotes continue to move against your trading position). Don’t panic! In this case, wait for the POWER indicator line to make a new level crossing and make another deal:

In this case, you will make a deal with a better price and will be able to close both deals with the best total result.
In real you will get:

  • Variant 1 – the profit on the two deals
  • Variant 2 – profit on 1 trade and loss on 1 trade
  • Variant 3 – a loss on two deals (this situation is very rare) – if this happens, the profit on previous trading operations will be much greater than any potential loss!!

You can learn more about how to trade with PRICE ACTION system REAL POWER indicator from our video:

Good news for those who do not have time to constantly be near the computer!! The REAL POWER indicator can send PUSH notifications to your smartphone (how to configure PUSH-notification Read Here)

That is, the best forex indicator REAL POWER can be installed on your home computer or VPS, scan the market and send you signals, and you can trade using the mobile platform MetaTrade4/5 installed on your smartphone!!

How to use FIBO CLOSER utility?

Each buyer of indicator PRICE ACTION REAL POWER gets a free utility FIBO CLOSER to automatically manage trades. This utility will automatically close your trade when the price touches the “0%” level on the FIBO-CHANNEL scale.

Thus, you can open deals and not accompany them manually. The utility will close trades automatically!

To use the FIBO CLOSER utility:

  • Copy its file to the “Experts” folder in the “MQL4” directory of your platform and restart your trading platform.
  • Install the FIBO CLOSER utility on the quote chart on which you installed the REAL POWER indicator.
  • Make sure that the automatic trading function is activated on your platform.

The utility will then automatically close trades as soon as the price touches the 0% level on the FIBO-CHANNEL scale (which you can see to the right of the quote chart).

Attention! Use the utility only on one timeframe! It is not recommended to use the utility on different timeframes of the same currency pair at the same time. Because the utility will close all trades on the signals of the timeframe on which the closing condition will appear first.

In How to useby

Manual for trading indicator – Octopus

Set the indicator into the trading platform:

Reboot your trading platform so that the indicator appears in the internal menu:

Place the indicator on the quotes chart.

Open the quote chart of any asset from the Market Watch of your platform. Reduce the quote chart to the minimum Zoom and drag the indicator to it. We recommend using the indicator on timeframes M15 and higher.

Of course, Octopus Stock trading system is not a magic Grail. Therefore, the statistics of the profitability of this indicator for different assets may be different. However, in any case, the self-optimization algorithm in the indicator will find the best parameters for trading. If you have performed self-optimization of the indicator and received bad statistics, then this trading asset may not be suitable for trading on the Octopus strategy at all.

Self-optimization of the Octopus Trading System indicator

After you have placed Octopus Trading System on the quotes chart, open the manual settings of the indicator and upload the set-file to optimize the indicator.
For example, if you are setting up a GBPCAD currency pair on the H1 timeframe, you need to select a set file to set up currency pairs with the corresponding timeframe.

Enable the self-optimization algorithm to TRUE. Click OK.

Have you already
subscribed?

The platform will freeze for a few seconds. At this time, the indicator will perform complex mathematical calculations and search for the best parameters for trading. After the optimization is over, the indicator will show statistics of the strategy that it has chosen for trading on the history of the quotes chart. You will see the results in a separate window. You can get approximately the same results if you run the indicator signals.

How it works in reality – watch the video below

How to trade with the Octopus Trading System indicator

Even a beginner can trade with the Octopus Trading System indicator. Here are the functions that the indicator will do automatically:

  • giving signals for trading – about when you need to open deals and on which trading asset
  • displaying arrows on the quotes chart that show in which direction to trade
    showing Take Profit level on the quotes chart
  • giving signals about closing deals – about when to close deals and on which trading asset

All you need to do is follow the indicator signals and earn money.

Auxiliary take Profit level. Use this level to manually set a Take Profit order. This will help you fixate a profit if you missed the closing signal. As a rule, the signal to close a trade coincides with this auxiliary Take Profit level.

How to start making money right now?

LEARN MORE

looking for help to find Best Software?

Write to us and we will find the best solution for YOU!

© 2023 All rights reserved

0
YOUR CART
  • No products in the cart.
Subtotal:
€0
CHECKOUT
BEST SELLING PRODUCTS
X2Capital Bot
X2Capital Bot
€243
SCALPING STATION EA
SCALPING STATION EA
€279
Galaxy PropFirm EA
Galaxy PropFirm EA
€345
ROCKET EA
ROCKET EA
€299
DARKMONEY ROBOT
DARKMONEY ROBOT
€325
Shopping cart close